User Manual

pop up the backup window. Select the device, backup path and backup format and then click

“Backup” button to start the backup.

8.3 Record Search & Playback

8.3.1 Search & Playback by Time-sliced Image

① Click StartSearchBy Time-sliced Image to go to “By Time-sliced Image” tab. There

are two view modes: by time and by camera. In the time view mode, a maximum of 64 camera

thumbnails can be showed. If the camera thumbnail number is more than 64, the cameras will

be listed directly by their camera name, not the thumbnail. A maximum of 196 camera names

can be listed. If the camera name number is more than 196, the time view mode will be

disabled and the camera view mode will be available only.

② Select one camera in the interface and then click “Open” button.

③ Click the image box to play the record in the small playback box on the left side of the

interface (the box which has image inside indicates that the record data exist).

④ Refer to the picture below. Drag the color blocks on the time scale to select the record data

and then click “Backup” button to pop up a window; select the device, backup path and backup

format in the window and then click “Backup” button to start the backup.

⑤ Click “Playback” button to play the record in the playback interface (refer to 8.2 Playback

Interface Introduction for details). Click “Close” to close the interface.