Owner`s manual

EPG
Changing Channels
There are four ways of channel selection - stepping through the channel list,
selection by number, from the on-screen channel list, and using the electronic programme guide(EPG).
Stepping through the channel list:
To move through the channel list, press the upward arrow or downward arrow key on the
remote control.
Selection by number:
Enter the channel list number directly by remote control to select desired channel.
auto scan will clean the channels that stored first.
mannal scan don't clean the channels,but it will not add the repeated channels that
have stored.
Selection by on-screen channels list:
You can also select the required channel directly from on-screen channel list. This is
displayed using the STB's main menu.
1. BBC1
2. BBC2
3. ITV1
4. ITV1
5. CHANNEL4
TV
Preview
BBC1
0 -Lock/ Unlock
1-Delete
2-Move up
3-Move down
Press the "MENU" button to enter the setup menu
of the STB.
Press the "LEFT" or "RIGHT" cursor button
to select .
Press the "OK" button to enter the sub-menu.
Press "UP" or "DOWN" cursor button to preview
channel.
Press "OK" button to switch to the desired channel.
1
2
3
4
Channel
Selection by EPG:
You can also select the required channel directly from electronic program guide (EPG).
This is displayed using the STB's main menu.
Preview
BBC1
SERVICE NAME
BBC1
Program Event
Like the channel list, the EPG screen displays a list of the stored channels along with
information on what programmes are being broadcast.
Press the "EPG" button to enter the EPG menu .
Press the "UP" or "DOWN" cursor button to highlight
channel.
Press "LEFT or "RIGHT cursor button to check
program information within 30 minutes.
Press "OK" button to switch to the desired channel
and preview channel.
10
OPERATION
Channel
Favorite Setting
Scan
NOTE:
Press numeric button" 0-3" to Lock/
Unlock ,Delete,Move up ,Move down
channels .
09:30
10:00
BBC1
BBC1
Information ofthe channels
10:30 11:00
Information ofthe channels
Information ofthe channels
Information ofthe channels
Channel Play
OK
Subtitle
Press Subtitle button to switch subtitle On/Off.
SUBTITLE