Owner`s manual

A/V setting
Time Setting
Language Setting
Factory Setting
A/V settings
Sort Channel
16:9 <>
Auto <>
Pal <>
CVBS <>
TV Shape
Conversion
Standard
Video Output
Press the "MENU" button to enter the setup menu of the STB.
Press the "LEFT" or "RIGHT" cursor button to select .
Press the "OK" button to enter the sub-menu.
Press "UP" or "DOWN" cursor button to select "A/V settings"
and press OK button .
Select the desired items and press "LEFT" or "RIGHT" cursor button to select
desired settings.
Press "EXIT" button 3 times to quit.
Setting
1
2
3
4
5
6
Various A/V modes can be set in this menu, such as TV shape,
conversion, TV standard and Video output.
TV shape
16:9
Auto
FullFrame
VerticalCut
PillarBox
Auto
FullFrame
Pan&Scan
LetterBox
4:3
TV shape
Conversion
Conversion
TV Sharp/ Conversion:
SYSTEM SET-UP
PAL
NTSC
AUTO
: Set to output PAL signal
: Set to output NTSC signal
: Set to auto-switching the output signal
Standard:
CVBS
Y Cb Cr
: Set to output CVBS video signal
: Set to component video signal
Video output:
16
Channel
Favorite Setting
Scan