User`s manual

INSTALLATIONS
6 ECX800 User’s Manual
Installing the Memory
The ECX800 board supports one DDR2 SO-DIMM memory socket for a
maximum total memory of 2GB, DDR2 667/533 (w/o ECC function).
Installing and Removing Memory Modules
To install DDR2 modules, locate the memory socket on the board and
perform the following steps:
1. Hold the DDR2 module so that the keys of the DDR2 module align
with those on the memory slot.
2. Gently push the DDR2 module in an angle as shown in the picture
below until the clips of the sockets lock to hold the DDR2 module in
place when the DDR2 module touches the bottom of the socket.
3. To remove the DDR2 module, press the clips with both hands.