User`s manual

BIOS SETUP
30 ECX800 User’s Manual
Advanced Chipset Features
This Setup menu controls the configuration of the chipset.
Phoenix - AwardBIOS CMOS Setup Utility
Advanced Chipset Features
DRAM Timing Selectable By SPD ITEM HELP
CAS Latency Time Auto
DRAM RAS# to CAS# Delay Auto
DRAM RAS# Precharge Auto
Precharge delay (tRAS) Auto
System Memory Frequency Auto
SLP_S4# Assertion Width 1 to 2 Sec
System BIOS Cacheable Enabled
Video BIOS Cacheable Enabled
Memory Hole at 15M-16M Disabled
PCI Express Root Port Func Press Enter
** On-Chip VGA Setting **
PEG/On Chip VGA Control Auto
On-Chip Frame Buffer Size 8MB
DVMT Mode DVMT
Menu Level >
DVMT/FIXED memory Size 128MB
SDVO Device Setting None
SDVO LVDS Protocol 1CH SPWG, 18bit
SDVO Panel Number 1024x768
Boot Display CRT
Panel Scaling Auto
Panel Number
TV Standard
Video Connector
TV Format
1024x768 18 bit SC
Off
Automatic
Auto
Onboard PCI-E LAN Enabled
LAN PXE Option ROM All Disable
DRAM Timing Selectable
This option refers to the method by which the DRAM timing is selected.
The default is By SPD.
CAS Latency Time
You can configure CAS latency time in HCLKs as 3 or 4 or 5 or 6. The
system board designer should set the values in this field, depending on
the DRAM installed. Do not change the values in this field unless you
change specifications of the installed DRAM or the installed CPU.
DRAM RAS# to CAS# Delay
This option allows you to insert a delay between the RAS (Row Address
Strobe) and CAS (Column Address Strobe) signals. This delay occurs
when the SDRAM is written to, read from or refreshed. Reducing the
delay improves the performance of the SDRAM.