User`s manual

BIOS SETUP
ECX800 User’s Manual 37
Power Management Setup
Phoenix - AwardBIOS CMOS Setup Utility
Power Management Setup
ACPI Function
Enabled ITEM HELP
ACPI Suspend
S1(POS)
RUN VGABIOS if S3 Resume
Auto
Power Management
User Define
Video Off Method
V/H SYNC+Blank
Video Off In Suspend
Yes
Suspend Type
Stop Grant
Modem Use IRQ
3
Suspend Mode
Disabled
HDD Power Down
Disabled
Soft-Off by PWR-BTTN
CPU THRM-Throttling
Instant-Off
75.0%
Wake-Up by PCI Card
Disabled
Menu Level >
Resume by Alarm
Disabled
Date (of Month) Alarm 0
Time (hh:mm:ss) Alarm 0 : 0 : 0
** Reload Global Timer Events **
Primary IDE 0
Enabled
Primary IDE 1
Enabled
Secondary IDE 0
Enabled
Secondary IDE 1
Enabled
FDD, COM, LPT Port
Enabled
PCI PIRQ[A-D] #
Enabled
ACPI Function
Enable this function to support ACPI (Advance Configuration and
Power Interface).
ACPI Suspend
The default setting of the ACPI Suspend mode is S1(POS).
RUN VGABIOS if S3 Resume
The default setting of this field is Auto.
Power Management
This field allows you to select the type of power saving management
modes. There are four selections for Power Management.
Min. Power Saving Minimum power management
Max. Power Saving Maximum power management.
User Define Each of the ranges is from 1 min. to 1hr.
Except for HDD Power Down which
ranges from 1 min. to 15 min.