User manual

USER MANUAL 1.4 | EC1000

Berghof Automation GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com

2VF100180FE02.docx | EC1000_HB_en_2D1652005ZD00.docx

3. Controller operation

CAUTION

Never plug in, apply, disconnect or touch connections while the device is

operating!

This could result in malfunction or destruction of the device. Before working on

the modules, always switch all infeeds to them off; including infeeds from con-

nected peripheral devices such as remote-feed encoders, programming de-

vices, etc.

MALFUNCTION

3.1. Commissioning

Before applying the supply voltage, recheck all connections to ensure they are properly wired and have the

correct polarity.

Switching on

The module is not equipped with its own main power switch. The PLC controller starts when the associated

equipment is switched on or when the power supply is connected.

Switching off

The PLC controller switches off when the associated equipment is switched off or the power supply is discon-

nected.

3.2. Function Selection, Indicators, Diagnostics

3.2.1. Status Indicators

The function of the status indicators frequently de-

pends on the software development environment

employed on the PLC controller.

 CP1131-P:

PLC programming using CODESYS and

Berghof Target Support Package.

 CPC++:

C programming directly on the LINUX operating

system.

from 2VF100515DG01.vsd