User manual

USER MANUAL 1.4 | EC1000
Berghof Automation GmbH | Harretstrasse 1 | 72800 Eningen | www.berghof.com
EC1000_HB_en_2D1652005ZD00.docx | 2VF100185FE02.docx
8
1.2. Hazard Categories and Terminology
The indications described below are used in connection with safety instructions you will need to observe for
your own personal safety and the avoidance of damage to property.
The indications have the following meaning:
DANGER
Immediate danger.
Failure to observe the information indicated by this warning will result in death,
serious injury or extensive property damage.
WARNING
Potential danger.
Failure to observe the information indicated by this warning may result in
death, serious injury or extensive property damage.
CAUTION
Danger.
Failure to observe the information indicated by this warning may result in injury
or property damage.
NOTICE
No hazard.
Information indicated in this manner provides additional notes concerning the
product.
1.3. Conformity Declaration
Both the standard version of the controller module and the extension modules mentioned below comply with
and make allowance for the following directives and standards:
 EMP Directive 2004/108/EC
 DIN EN 61131-2:2009-1 Programmable controllers
Part 2: Equipment requirements and tests
 DIN EN 61000-6-2:2011-06 Electromagnetic compatibility (EMP)
Part 6-2: Generic standard – immunity for industrial environments
 DIN EN 61000-6-4:2011-9 Electromagnetic compatibility (EMP)
Part 6-4: Generic standard – electrostatic discharge for industrial environments
 UL 508:2013-10 Industrial Control Equipment
17 th edition / 1999-01-28