User manual

BROWSING THE MENU TREE ENG
Page 32
19 BROWSING THE MENU TREE
This chapter describes all of the parameters and functions you can access and edit through the front panel of the audio
processor, grouped according to functional area. See the Menu Tree on the following page. It is useful to note that you
can also access all menu settings and parameters more quickly and conveniently through the PC control software.
PRESETS (PROCESSING CURVES)
The main menu displays the 30 factory preset and 10 editable curves.
To select any curve (preset), turn the shuttle knob until it is displayed on the screen, and press Enter.
Alternative curves to the current one are blinking.
FIRMWARE VERSION
Indicates the current firmware version. To upgrade the firmware, see the final chapters of this manual.
DISPLAY REFERENCES
The Display References menu displays the name and operating range, in sequence, of each meter that appears in the
main screen (see paragraph 17.3).
The display returns to the main screen after displaying each meter. Press the ESC or ENTER key to stop it before it has
finished.
Each time the processor is switched on, the Display References sequence is automatically started..
OPTIONAL CONTROLS
Select Optional Control from the main menu to access a menu that allows you to display and/or edit the following: serial
port status, Stereo Enhancer parameters, Coder MPX pilot values, digital input status, the level of the internally
generated RDS signal, the firmware serial number (code), and the internal temperature.
INPUT CALIBRATION
The Input Calibration menu contains all parameters related to processor audio input.
OUTPUT CALIBRATION
The Output Calibration menu contains all parameters related to processor audio output.
The output parameters that may be modified include: Output Level, Pre-Emphasis, Noise Gate and Output Mode.
EDIT PRESET
The Edit Preset menu allows you to edit any of the preset curves as desired, or to draw a new processing profile from
scratch.