User manual

ADDITIONAL SETUP TASKS ENG
Page 53
26.3 READING OUT THE FIRMWARE CODE
The Firmware Code menu page displays the internal firmware serial code.
The user must supply this number to the manufacturer in order to upgrade the processor firmware or add the RDS
option.
26.4 READING OUT THE INTERNAL TEMPERATURE
The Temperature sub-menu shows the internal temperature of the processor during operation.
- The current temperature is updated each time this option is accessed.
- We recommend checking the internal temperature after a few hours of continuous operation.
- For proper operation, the temperature should never exceed 50 °C
. If this threshold is exceeded, you must leave a
ventilation space
equivalent to at least 1 rack unit both above and below the processor.
You can find the Temperature sub-menu in the Optional Controls menu Press Esc to exit.
26.5 READING OUT THE FIRMWARE VERSION
The Firmware Version sub-menu shows the current version of your firmware.
Firmware may be upgraded to later versions (see related section).
The page is available in the root menu. Press Esc to exit.