User manual

FIRMWARE UPGRADE PROCEDURE ENG
Page 79
J) Select the PC serial port on the screen
K) Click Request button.
L) Make sure the Identification is correctly done
(Processor Identification passed message + firmware code displayed
in the right field), and click ‘UpGrade’. The upgrade will continue automatically. NOTE: the upgrade processing must not
be interrupted.
NOTE: once the upgrading procedure has started, it must NOT be interrupted for any reason.
M) Once you have completed the upgrade procedure, shut off
the equipment.
N) Move the jumpers JP1, JP2, JP3, CN 5 and CN 6 back to their ‘normal operation’ position
O) Turn the processor on.
3) HOW TO UPGRADE FROM VERSION MPX ONLY
TO MPX + RDS (Version FM only)
A) Follow the procedure suggested at paragraph 1) and 2) up to Point G)
B) Unzip the RDS key file supplied by the manufacturer
C) Make a copy on Yr local HD drive (f.i. on the Desktop) of the Firmware_Upgrade folder provided
on the CD ROM