User manual

TECHNICAL SPECIFICATIONS - ST / WEB version ENG
Page 83
32 TECHNICAL SPECIFICATIONS - ST / WEB version
GENERAL FEATURES
Environmental
0 to 45 °C, 0-95% RH, non-condensing
AC Rate
230 Vac / 110 Vac - 50 / 60 Hz
Dimensions
1 rack unit, 352 x 483 x 44 mm
Power consumpt.
40 Watt
Net Weight
around 7 Kg
Shipping Weight
around 8 Kg
ANALOG STEREO AUDIO INPUT
DIGITAL AUDIO INPUT (optional)
Conversion
48 KHz, 24 bit
Connector Type
XLR el. bal. + optical Tos link
Connector Type
XLR female electronically balanced
Impedance
110 Ohm
Max Input Level
+ 22 dBu
Formats
AES3/EBU, SPDIF (IEC-60958 TYPE II)
Nominal Inp Level
0 dBu +/- 6dBu
Sampling Rates
32 KHz / 44.1 KHz / 48 KHz / 96 KHz
Inp. Level Range
- 20 dB to 20 dB
Resolution
24 bit
Impedance
600Ohm / 10KOhm EMI –suppressed
A/D conversion
24 bit
Dyn. Range
98 dB RMS (102 dB A weight)
Configuration
automatic selection and jitter correction
Gain Offset
+/- 6 dB
Input Sensitivity
200 mVpp
CMRR
90 dB
AGC Range
0 to – 20dBFs
ANALOG STEREO AUDIO OUTPUT
Conversion
24 bit
Power Limiting
According to ITU-R 412
Connector Type
XLR male electronically balanced
D/A conversion
Crystal Semiconductor CS4224 48KHz /
24 bit Sigma Delta
Configuration
Flat or 50 / 75uS Preemphasized.
DIGITAL AUDIO OUTPUT (optional)
Level Range
0 dBu to 15 dBu (0.5 dB step)
Connector Type
XLR male el. bal. + optical Tos link
Load Impedance
600Ohm
Formats
AES3/EBU, SPDIF
Source Imped.
50Ohm EMI – suppressed
Dyn. Range
98 dB RMS (104 dB A weight)
Sampling Rate
48 KHz
Distortion
0.005% THD, de-emphasized
Word lenght
24 bit
S/N
> 90 dB, de-emphasized
Impedance
110 Ohm
Crosstalk
> 70 dB
Level
0 dBFs corresponding to 100%
modulation (not adjustable)
Channel separ.
> 70 dB (30 Hz - 15 KHz)
Tone generation
400 Hz, Ref 100% Modulation
STEREO ENHANCER MODULE AGC OPERATION
Effect Depth
0 mSec to 30 mSec
AGC Speed
0 to 6 dB/sec (adjustable - 0.2 dB step)
Effect Band
3KHz / 5KHz / 8KHz to 15KHz
AGC Range
-20 dB to 20 dB
Effect Level:
-29dBu to -6dBu
AGC Hold time
Selectable, from 0 to 3 sec
REMOTE CONTROL
AGC Max Gain
Selectable 8, 10, 12, 15 or 20 dB
Serial Ports
2 RS232 SubD 9P optically decoupled
Satellite Port
4800 baud
PC Host Port
19200 baud
BY-PASS MODE Analogic Input, AGC Off, Gain Offset 0dB, Out Level 0dBu INPUT FILTER CHARACTERISTICS
Frequency Resp.
30 Hz-15 KHz (+/- 0.1 dB)
High Pass
30 Hz (IIR-4th Order)
Output Noise
-90 dB (A-weighted)
Low Pass
15 KHz (FIR-84 Taps, 15 KHz / -0.1dB,
17 KHz / -70dB)
THD
0.005 %
OUTPUT FILTER CHARACTERISTICS
Latency
< 1.5 mSec
PassBand Ripple
+ / - 0.01 dB
Low Pass
15 KHz (FIR-90 Taps, 15 KHz / -0.1dB,
17 KHz / -80dB)
THD + Noise
-91 dB
PROCESS
Preset curves
30
Mid2 Band
Atk: 40ms, Rel: 150ms
User edit. curves
10
Mid3 Band
Atk: 30ms, Rel: 120ms
AGC bands
1
High Band
Atk: 20ms, Rel: 100ms
Bands
5 (Bass, Mid1, Mid2, Mid3, High)
Bass Band
Atk: 300ms, Rel: 600ms
Processing
Sample Rate
Internal rates from 48 kHz to 380 kHz,
according to processing being performed
Mid1 Band
Atk: 100ms, Rel: 200ms
Proc. Resolution
24 bit