User manual

TECHNICAL SPECIFICATIONS – TV version ENG
Page 85
33 TECHNICAL SPECIFICATIONS – TV version
GENERAL FEATURES
Environmental
0 to 45 °C, 0-95% RH, non-condensing
AC Rate
230 Vac / 110 Vac - 50 / 60 Hz
Dimensions
1 rack unit, 352 x 483 x 44 mm
Power consumpt.
40 Watt
Net Weight
around 7 Kg
Shipping Weight
around 8 Kg
ANALOG STEREO AUDIO INPUT
DIGITAL AUDIO INPUT (optional)
Conversion
48 KHz, 24 bit
Connector Type
XLR el. bal. + optical Tos link
Connector Type
XLR female el. balanced
Formats
AES3/EBU, SPDIF (IEC-60958 TYPE II)
Max Input Level
+ 22 dBu
Sampling Rates
32 KHz / 44.1 KHz / 48 KHz / 96 KHz
Nominal Inp Level
0 dBu +/- 6dBu
Resolution
24 bit
Inp. Level Range
- 20 dB to 20 dB
A/D conversion
24 bit
Impedance
600Ohm / 10KOhm EMI –suppressed
Configuration
automatic selection and jitter correction
Dyn. Range
98 dB RMS (102 dB A weight)
Input Sensitivity
200 mVpp
Gain Offset
+/- 6 dB
AGC Range
0 to – 20dBFs
CMRR
90 dB
Input Modes
Stereo, Mono from Right
Input Modes
Stereo, Mono from Right
ANALOG STEREO AUDIO OUTPUT
Conversion
24 bit
Tone generation
400 Hz, Ref 100% Modulation
Connector Type
XLR male el. balanced Crystal Semiconductor CS4224 48KHz /
Configuration
Flat or 50 / 75uS Preemphasized.
D/A conversion
24 bit Sigma Delta
Level Range
0 dBu to 15 dBu (0.5 dB step)
Load Impedance
600Ohm
DIGITAL AUDIO OUTPUT (optional)
Source Imped.
50Ohm EMI – suppressed
Connector Type
XLR male el. bal. + optical Tos link
Dyn. Range
98 dB RMS (104 dB A weight)
Formats
AES3/EBU, SPDIF
Distortion
0.005% THD, de-emphasized
Sampling Rate
48 KHz
S/N
> 90 dB, de-emphasized
In/Out delay
The same as the analog output
Crosstalk
> 70 dB
Channel separ.
> 70 dB (30 Hz - 15 KHz)
Level
0 dBFs corresponding to 100%
modulation (not adjustable)
In/Out delay
0 to 300 mSec, 10 mSec step
REMOTE CONTROL AGC OPERATION
Serial Ports
2 RS232 SubD 9P optically decoupled
AGC Speed
0 to 6 dB/sec (adjustable - 0.2 dB step)
Satellite Port
4800 baud
AGC Range
-20 dB to 20 dB
PC Host Port
19200 baud
AGC Hold time
Selectable, from 0 to 3 sec
AGC Max Gain
Selectable 8, 10, 12, 15 or 20 dB
BY-PASS MODE Analogic Input, AGC Off, Gain Offset 0dB, Out Level 0dBu INPUT FILTER CHARACTERISTICS
Frequency Resp.
30 Hz-15 KHz (+/- 0.1 dB)
High Pass
30 Hz (IIR-4th Order)
Output Noise
-90 dB (A-weighted)
Low Pass
15 KHz (FIR-84 Taps, 15 KHz / -0.1dB,
17 KHz / -70dB)
THD
0.005 %
OUTPUT FILTER CHARACTERISTICS
Latency
< 1.5 mSec
PassBand Ripple
+ / - 0.01 dB
Low Pass
15 KHz (FIR-90 Taps, 15 KHz / -0.1dB,
17 KHz / -80dB)
THD + Noise
-91 dB
PROCESS
Preset curves
30
Mid2 Band
Atk: 40ms, Rel: 150ms
User edit. curves
10
Mid3 Band
Atk: 30ms, Rel: 120ms
AGC bands
1
High Band
Atk: 20ms, Rel: 100ms
Bands
5 (Bass, Mid1, Mid2, Mid3, High)
Bass Band
Atk: 300ms, Rel: 600ms
Processing
Sample Rate
Internal rates from 48 kHz to 380 kHz,
according to processing being performed
Mid1 Band
Atk: 100ms, Rel: 200ms
Proc. Resolution
24 bit
SIGNAL PROCESS FILTERS USER CONTROLS
Sampling rate
32 kHz to 96 kHz
Super Bass Type
Disco Soft Bass, Club Long Bass, Tight
Hard Bass
Low Band filter
Band Pass 30Hz-200Hz (IIR 4th Order-
Butterworth)
Super Bass Level
0 to +12dB
Mid 1 Band filter
Band Pass 200Hz-1.5Khz (IIR 4th
Order-Butterworth)
Bass Thr Level
Adj.– 6 to + 6 dB (0.5 dB step)