User`s manual

MANO110 Series Mini ITX Board User’s Manual
Jumpers and Connectors
19
 2.4.5 USBx2 + LAN Connectors (CN5, CN6)
The board supports two three-layer USB & LAN connectors,
CN5 and CN6. The upper CN5B and CN6B ports are for LAN.
The board is equipped with a high performance Plug and Play Ethernet
interface fully compliant with the IEEE 802.3 standard. To connect the
board to 10-Base-T, 100-Base-T or 1000 Base-T hub, just plug one
end of cable to the Ethernet connector and connect the other end
(phone jack) to a 10-Base-T, 100-Base-T or 1000 Base-T hub.
The lower double-deck CN5A and CN6A are USB 2.0 ports compliant
(480Mbps) that can be connected to any USB peripherals, such as
keyboard, mouse, and scanner.
Pin
Signal
CN5B , CN6B
1
LAN1_MDI0+
2
LAN1_MDI0-
3
LAN1_MDI1+
4
LAN1_MDI1-
5
LAN1_MDI2+
6
LAN1_MDI2-
7
LAN1_MDI3+
8
LAN1_MDI3-
A
100 LAN LED(Green)/
1000 LAN LED(Orange)
B
Active LED
Pin
Signal
CN5A , CN6A
1 2 3 4
5 6 7 8
1, 5
USB Vcc
2, 6
USB -
3, 7
USB +
4, 8
USB GND