User`s manual

NA-110 Network Appliance User’s Manual
Hardware Description
10
2.2 Memory Module (SODIMM)
The main board supports one DDR3 1066 SODIMM socket. Maximum memory capacity
is up to 4GB None-ECC unbuffer memory.
The following steps show you how to install the memory modules:
1 Push down each side of the SODIMM socket.
2 Align the memory module with the socket that notches of memory module must match the
socket keys for a correct installation.
3 Install the memory module into the socket and push it firmly down until it is fully seated.
The socket latches are levered upwards and clipped on to the edges of the DIMM.
4 Install any remaining SODIMM modules.