User`s manual

NA-110 Network Appliance User’s Manual

Hardware Description

2.4 Jumper Settings

This section provides the information about jumpers and connectors of NA-110. Proper

jumper settings configure the main board in this appliance to meet your applicati on

purpose. We are herewith listing a summary table of all jumpers and default settings for

onboard devices, respectively.

Jumper

Definition

Jumper Settings

Function

JP1

Auto Power Button Mode Selection

Short(1-2)

Auto Power On (Default)

Short(2-3)

Power on By Power button

JP2

Reserve

JP3

Clear CMOS Setting

Short (1-2)

Normal(Default)

Short (2-3)

Clear BIOS CMOS

JP4

TACT SW1 Selection

Short (1-2)

Power On/Off

Short (3-4)

Reset(Default)

Short (5-6)

GPI

2.4.1 Auto Power Button Jumer (JP1)

If JP1 is enabled for AC power input, the system will be automatically power on without pressing

soft power button. If JP1 is disabled for AC power input, it is necessary to manually press soft

power button to power on the system.

Description

Function

Jumper Setting

Auto Power Button Mode Selection

Auto Power On (Default)

JP6

Power on By Power button

JP6