User`s manual

NA-110 Network Appliance User’s Manual

Hardware Description

2.4.2 Restore Bios Setting (JP3)

Use this jumper to erase and restore CMOS memory and BIOS setting. Put jumper clip to pin 2-3

for a few seconds then move it back to pin 1-2, by doing this procedure CMOS data resets to its

safe default settings.

Description

Function

Jumper Setting

CMOS Clear

Normal (Default)

JP3

Clear CMOS

JP3

2.4.3 SW1 Function Select (JP4)

Use this jumper to select the TACT SW1 Function.

Description

Function

Jumper Setting

TACT SW1 Function Selection

Power On/Off

JP4

Reset (Default)

JP4

GPIO

JP4