User`s manual

SBC86822 Series All-In-One Mini ITX Board User’s Manual

Jumpers and Connectors

2.4.7 ATX Power Connector (CN10)

Steady and sufficient power can be supplied to all components on the

board by connecting the power connector. Please make sure all

components and devices are properly installed before connecting the

power connector. Align the power connector with its proper location on

the board, and connect it tightly.

If you use a 20-pin ATX power supply, please remove the small cover

from the power connector before plugging in the power cord; otherwise,

please do not remove it.

Pin Signal Pin Signal

1 3.3V 11 3.3V

2 3.3V 12 -12V

3 GND 13 GND

4 5V 14 PS_ON

5 GND 15 GND

6 5V 16 GND

7 GND 17 GND

8 PW_OK 18 -5V

9 5V_SB 19 5V

10 12V 20 5V

CN10

2.4.8 SATA Connectors (CN16, CN17)

These SATA connectors are for high-speed SATA interface ports and

they can be connected to hard disk devices.

Pin Signal

1 GND

2 SATA_TX+

3 SATA_TX-

4 GND

5 SATA_RX-

6 SATA_RX+

CN16/CN17