User`s manual

SBC86822 Series All-In-One Mini ITX Board User’s Manual
Award BIOS Utility
52
Enabled
It automatically activates while the system
boots up and a warning message appears
for an attempt to access the boot sector or
hard disk partition table.
Disabled
No warning message will appear for
attempts to access the boot sector or hard
disk partition table.
NOTE This function is only available with DOS and other
operating systems that do not trap INT13.
z CPU L1 & L2 Cache
These two options speed up memory access. However, it depends
on the CPU/chipset design. The default setting is “Enabled”. CPUs
with no built-in internal cache will not provide the “CPU Internal
Cache” item on the menu.
Enabled
Enable cache
Disabled
Disable cache
z CPU L3 Cache
Use this item to enable L3 cache only for the CPUs with such a
function.
z Quick Power On Self Test
This option speeds up Power on Self Test (POST) after you turn on
the system power. If set as Enabled, BIOS will shorten or skip
some check items during POST. The default setting is “Enabled”.
Enabled
Enable Quick POST
Disabled
Normal POST
z First/Second/Third Boot Device
These items allow the selection of the 1
st
, 2
nd
, and 3
rd
devices that
the system will search for during its boot-up sequence. The wide
range of selection includes Floppy, LS120, ZIP100, HDD0~3, SCSI,
and CDROM.
z Boot Other Device
This item allows the user to enable/disable the boot device not
listed on the First/Second/Third boot devices option above. The
default setting is “Enabled”.