User`s manual

SBC86822 Series All-In-One Mini ITX Board User’s Manual
Award BIOS Utility
53
z Boot Up NumLock Status
Selects power on state for NumLock. The default value is “On”.
z Gate A20 Option
The default value is “Fast”.
Normal
The A20 signal is controlled by keyboard controller
or chipset hardware.
Fast
Default: Fast. The A20 signal is controlled by Port
92 or chipset specific method.
z Typematic Rate Setting
This determines the typematic rate of the keyboard. The default
value is “Disabled”.
Enabled
Enable typematic rate and typematic delay
programming
Disabled
Disable typematic rate and typematic delay
programming. The system BIOS will use default value
of these 2 items and the default is controlled by
keyboard.
z Typematic Rate (Chars/Sec)
This option refers to the number of characters the keyboard can
type per second. The default value is “6”.
6
6 characters per second
8
8 characters per second
10
10 characters per second
12
12 characters per second
15
15 characters per second
20
20 characters per second
24
24 characters per second
30
30 characters per second