User`s manual

SBC86822 Series All-In-One Mini ITX Board User’s Manual

Award BIOS Utility

4.10 PnP/PCI Configuration Setup

This section describes configuring the PCI bus system. PCI, or

Personal Computer Interconnect, is a system which allows I/O devices

to operate at speeds nearing the speed the CPU itself uses when

communicating with its own special components. This section covers

some very technical items and it is strongly recommended that only

experienced users should make any changes to the default settings.

z Init Display First

This item allows you to decide whether PCI Slot to be the first

primary display card.

z Reset Configuration Data

Normally, you leave this item Disabled. Select Enabled to reset

Extended System Configuration Data (ESCD) when you exit Setup

or if installing a new add-on cause the system reconfiguration a

serious conflict that the operating system can not boot. Options are:

“Enabled, Disabled”.

z Resources Controlled By

The Award Plug and Play BIOS can automatically configure all

boot and Plug and Play-compatible devices. If you select Auto, all

interrupt request (IRQ), DMA assignment, and Used DMA fields

disappear, as the BIOS automatically assigns them. The default