User`s guide

ManualsBrandsAxis ManualsComputer equipment2110

AXIS 2110 User’s Manual Lenses and Focusing

Appendix A - Lenses and Focusing

The AXIS 2110 features a replaceable CS-type Tele/Wide Zoom lens that can be targeted

for different applications. Using rotational focus control, the lens must first be focused

under normal, stable conditions to optimize the image quality for the camera.

The camera can be focused manually, or with the help of the Focus Assistant. The latter is

useful if your AXIS 2110 is located remotely from your viewing workstation. Having

positioned the camera, follow the instructions below to focus it.

Important!

Manual Focusing

Note: The unit is supplied with the lens set in approximate focus position, with the focus set to

infinity.

Although the AXIS 2110 is intended for both outdoor and indoor use, it is important to note that the

charged coupled device (CCD) in the camera can become permanently damaged if it is exposed to too

much direct sunlight or halogen light. Therefore, it is important that the Adjustment Ring is not set fully

open when installing the camera in bright light conditions. The Axis warranty does not cover CCD dam-

age caused by prolonged exposure to strong light.

❹Rotate the Focus Ring

to an appropriate posi-

ton - until you are satis-

fied with the quality of

the camera image.

Status Indicator

❶Power-on the AXIS 2110 and wait 10 seconds.

Control Button

Iris Adjustment Ring

Tele/Wide Zoom Lens

Focus Ring

❷The Iris Adjustment Ring effectively closes

and opens the camera lens to regulate the

amount of light entering the camera. Closing

the ring reduces the amount of light to pro-

duce a better depth of field and focus over a

greater distance. Whereas, a more open lens

provides better results in low-light condi-

tions.

Rotate the Iris Adjustment Ring to an appro-

priate position for your chosen installation,

as follows:

• indoor scene - fully open (O)

• outdoor scene - mid position

(between C and O)

❸Start your browser

application and check

the picture. Adjust the

Tele/Wide Zoom Lens to

a suitable postion for

your application.