User`s guide

Troubleshooting AXIS 2110 User’s Manual
44
PINGing Your IP Address
By sending a packet to the specified address and waiting for a reply, the PING utility can
determine whether a specific IP-address is accessible. It also provides a particularly useful
method for confirming addressing conflicts with your AXIS 2110 on the network.
Follow the instructions below in association with Problems, Possible Causes and Remedial
Actions, on page 45, and run the PING utility to troubleshoot TCP/IP problems on your
network:
1. Disconnect your AXIS 2110 from the network.
2. Start a DOS window.
3. Type
ping x.x.x.x, where x.x.x.x is the IP address of the AXIS 2110.
The subsequent replies as shown in the table below will provide an explanation as to the
cause of the problem:
PING Reply Interpretation and recommendation
bytes = 32 time = 2 ms...... The IP address is already used and cannot be used again.
You must obtain a new IP address.
destination host unreachable The AXIS 2110 is not accessible within your subnet.
You must obtain a new IP address.
request timed out This IP address is not used by anyone and is available for use with your
AXIS 2110.