User manual

10
WHITE
AXMINSTER
W
Specification...
www.axminster.co.uk
Axminster No. AWMS10 (108004)
Blade size. 250mm x 16mm Bore
Motor 230V 50Hz 1400W
Speed SOFT START 1800- 4500 rpm
Max Mitre Angle Left 47˚ Right 47˚
Table presets Left and Right 15˚, 22.5˚, 30˚ and 45˚
Max Tilt Angle Vertical to Left 45˚
Table Size 450mm x 140mm
Dust Extraction Port 48mm Diameter
Weight 14.5 Kgs
Maximum footprint, Saw 'up', sawdust bag and support rails fitted.
Width 830 Depth 810 Height 510
Minimum footprint, Saw 'housed', no accessories fitted.
Width 450 Depth 480 Height 320
Supplied Cable Length 2 Metres
Laser Aligning Device. Class 2 Protection
Noise measurements to EN 50144
Lpa (sound pressure) dB(A) 96.5
Lwa (acoustic power) dB(A) 109.5
Vibration 1.3 M/s
2
Identification & Description of the Mitre Saw...
Your 10” compound mitre saw should have been shipped to you in the 'housed' position, i.e.
with the saw body locked down. Please take some time to identify the various parts of your
machine so that you familiar with the terminology we will use to enable you to set up and
operate your machine safely and correctly.
Lock down pin The Lock Down Pin is a simple latching pin that can be engaged
(pushed to the left) into the saw mounting frame to hold the saw body
down in the 'housed' position or disengaged (pulled to the right) to allow
the saw body to rise to the 'up' position. Push down on the saw to ease
the friction on the pin before unlatching. DO NOT engage the Lock Down
Pin whilst operating the saw.
IT IS RECOMMENDED THAT YOU WEAR EAR
PROTECTION WHEN USING THIS DEVICE
!