Installation Guide

Page 36
Installing AZEK Rail Stairs with Glass Infi ll
ASSEMBLE LOWER RAIL SECTION
6
• Place Bottom Rail over Bottom Support Rail.
• Install Bottom Glass Channel utilizing pre-drilled holes.
Bottom Glass Support Extrusion:
Pre-drilled holes are in channel
• Install Bottom Glass Channel utilizing pre-drilled holes.
ATTACH LOWER GASKET AND INSTALL GLASS PANEL
7
• Apply Rubber Gasket to bottom of Glass Panel fi rst.
• Set panel/gasket assembly into Bottom Glass Channel.
7/64” Pre-drill
#8 x 1” Coated
Screws