Installation Guide
Page 10
Installing Column Wrap
Parts
• AZEK Column Wraps are not structural and are not intended for load bearing applications.
• Manufactured edges of the column wrap are sharp and should be handled with care.
• AZEK Column Wrap should be installed in accordance with the local building codes and the
installation guidelines included below. AZEK Building Products Inc. accepts no liability or
responsibility for the improper installation of this product. Failure to install AZEK Column Wrap in
accordance with applicable building codes and this Installation Guide may lead to personal injury,
affect product performance and void the product warranty.
• AZEK Column Wrap may not be suitable for every application. It is the sole responsibility of the
installer to be sure that AZEK Column Wraps are t for the intended use. Since all installations are
unique, it is also the installer’s responsibility to determine specic requirements in regards to each
application.
• AZEK Building Products recommends that all applications be reviewed by a licensed architect, engineer,
or local building ofcial before installation. If you have any questions or need further assistance, please
call AZEK Customer Service at 877-ASK-AZEK (877-275-2935) or visit our website at www.AZEK.com.
WARNING! Please read all instructions completely before starting any part of the installation.