Installation Guide

Page 10
Parts
• AZEK
®
Column Wraps are not structural and are not intended for load bearing applications.
• Manufactured edges of the column wrap are sharp and should be handled with care.
• AZEK Column Wrap should be installed in accordance with the local building codes and the installation guidelines
included below. AZEK Building Products Inc. accepts no liability or responsibility for the improper installation of
this product. Failure to install AZEK Column Wrap in accordance with applicable building codes and this Installation
Guide may lead to personal injury, affect product performance and void the product warranty.
• AZEK Column Wrap may not be suitable for every application. It is the sole responsibility of the installer to be sure
that AZEK Column Wraps are fit for the intended use. Since all installations are unique, it is also the installer’s
responsibility to determine specific requirements in regards to each application.
• AZEK Building Products recommends that all applications be reviewed by a licensed architect, engineer, or local
building official before installation. If you have any questions or need further assistance, please call AZEK Customer
Service at 877-ASK-AZEK (877-275-2935) or visit our website at AZEK.com.
WARNING! Please read all instructions completely before starting any part of the installation.
Installing Column Wrap