User Manual

PROBLEM CAUSE SOLUTION
Link LED on LEX
unit is on, Host
LED on LEX unit
is off.
•Thehostcomputerisnot
powered on.
•TheLEXunitisnot
connected to the computer
(when used with the optional
LEX AC adapter).
•Thecomputerdoesnot
support USB hubs.
•TheRanger2204is
malfunctioning.
1. Disconnect all USB devices from the REX unit.
2. Disconnect the LEX unit from the computer.
3. Disconnect the REX unit from the AC power
adapter.
4. Reconnect the LEX unit to the computer.
5. Reconnect the REX unit to the AC power
adapter.
6. In the Universal Serial Bus controllers section
of Device Manager, check that the Ranger 2204
is recognized as a “Generic USB Hub”.
Ranger 2204 units
were working, but
the Host LED on
LEX/REX units are
suddenly blinking.
•TheREXunitisinsuspend
mode. The operating system
may put the Ranger 2204
in suspend mode when the
computer is put into a
Suspend/Standby state or
when no USB devices are
attached.
1. Recover/Resume the operating system from
Suspend/Standby mode (see your operating
system’s documentation).
2. Attach a USB device to the Ranger 2204.
All LEDs on both
the LEX unit and
REX unit are on,
but the USB device
does not operate
correctly or is
detected as an
“Unknown Device”
in the operating
system.
•TheUSBdeviceis
malfunctioning.
•Thecomputerdoesnot
recognize the USB device.
•Theapplicationsoftwarefor
the device is not operating.
•TheRanger2204is
malfunctioning.
1. Disconnect the Ranger 2204 from the computer.
2. Connect the USB device directly to the USB port
on the computer.
3. If the device does not operate properly,
consult the user documentation for the device.
4. Update your system BIOS, chipset, or USB Host
controller drivers from your System/Mother-
board manufacturer’s website.
5. If the device operates properly when directly
connected to the computer, connect another
device (of a different type) to the Ranger 2204.
Connect the Ranger 2204 to the computer.
6. If the second device does not operate, the
Ranger 2204 may be malfunctioning.
Contact technical support for assistance.
7. If the second device does operate properly,
the first device may not be compatible with
the Ranger 2204.
9