User Manual

Introduction

The instructions in this guide assume a general knowledge of computer installation procedures, familiarity

with cabling requirements, and some understanding of USB devices.

NOTE: Notes provide additional information that could be useful.

CAUTION: Cautions provide important information about an operational requirement.

Ranger 2204 Product Contents

Your Ranger 2204 is packaged with:

• LEXunit(LocalExtender)

• REXunit(RemoteExtender)

• REXACpoweradapter(1)

USB 2.0 Cable (6 ft)•

Quick Start Guide and Warranty Information•

An additional AC power adapter may be purchased for the LEX unit in the event that your USB port can not supply

the required 500mA current. Please contact an Icron Sales representative for further details (See Page 13).

Requirements

To complete the installation, you will also require the following items that are not included with the product:

• USB1.1or2.0compatiblecomputer(hostcomputer)withaUSBcompliantoperatingsystem

• USB1.1or2.0compatibledevice

• Cat5UnshieldedTwistedPair(UTP) cable with two RJ45 connectors (if using surface cabling),

OR, Cat 5 cabling with two information outlets and two Cat 5 patch cords with RJ45 connectors

(if using premise cabling)

All references to Cat 5 cable in this document represent the minimum requirement. Category 6 or better or STP cable

may be substituted.

About the Ranger 2204

The Ranger 2204 incorporates Icron’s patented ExtremeUSB® technology, enabling users to extend beyond

the standard 5m cable limit for USB peripheral devices. With the Ranger 2204, USB devices can be located up

to 100 meters from the computer.

The Ranger 2204 is composed of two individual units: the LEX unit and the REX unit.

note