User Guide

Manual Document# 3PXCC4A3001 15
B&B Electronics Mfg Co – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax [phone]
B&B Electronics Ltd – Westlink Comm. Pk – Oranmore, Galway, Ireland – Ph [phone] – Fax [phone]
Click off (check mark out of box) Use Automatic Settings.
Select Basic Configuration 0007 (or last one).
Select Input / Output Range.
Click Change Setting.
Change Address to match the free address settings you found
earlier.
Click OK.
Select Interrupt Request.
Click Change Settings.
Change IRQ to match the free IRQ settings you found earlier.
At this point you can shut down the system and physically install
your B&B Electronics Serial Card into an available ISA slot. Double
check to make sure the addresses and IRQ’s on the Serial Card are
set to the correct settings.