Datasheet

800-624-1070
www.imcnetworks.com
Making Your Net
Work
Better — Since 1988
RoHS Compliant
Media Conversion
Features and Benefits
Flexible Solution
• Connects 10/100/1000 Mbps copper
to 100 or 1000 Mbps fiber SFP or
10/100/1000 Mbps or 1000 Mbps
copper SFP
• Supports Jumbo Frames
(up to 10240 bytes)
• Rugged standalone metal enclosure
with internal power supply
• Multiple mounting options
(desktop, wallmount or rackmount)
• For multimode, single-mode, single-strand
and CWDM fiber
• Features configurable PoE reset on
Fiber Loss of Signal (LOS)
Power Options
• Supports IEEE 802.3af PoE (15.4W) and
IEEE 802.3at PoE+ (25.5W) standards
• Internal AC power supply
• Significant cost-savings; no need to extend
existing power/cabling to supply power to
a device
Plug-and-Play Operation
• User-friendly Auto Negotiation technology
• Provides greater installation flexibility;
choose the best location for a powered
device
• Auto-Cross MDI/MDIX offered on
copper ports
10/100/1000 Mbps PoE & PoE+ Switching Media Converter
PoE and PoE+ Giga-McBasic
Supporting the IEEE 802.3af and 802.3at standards, the multi-port PoE
and PoE+ Giga-McBasic media converters offer unparalleled installation
flexibility and cost-savings.
The PoE and PoE+ Giga-McBasic are the perfect solutions for
network applications that require Power over Ethernet for locations
inside buildings where PoE is required to power an Ethernet
device. Their small, table-top design and durability make them
perfect for installation anywhere space is limited. Additionally,
both units are manufactured with an internal AC power supply.
This feature significantly increases reliability over products that use
awkward, external AC/DC power transformers.
The PoE Giga-McBasic unit comes with one SFP or fixed fiber
transceiver, one PoE/PSE 10/100/1000Base-T copper port that
provides 15.4 Watts of power with data, and one 10/100/1000
Mbps copper port to connect a non-PoE unit to the same fiber
uplink.
The PoE+ Giga-McBasic unit comes with one SFP or fixed fiber
transceiver and two PoE/PSE 10/100/1000Base-T copper. Each
port provides 25.5 Watts of power with data.
As a fiber-fed media converter, it provides both power and data
to a remote device over standard CAT5, eliminating the need for
additional power to the remote device. The copper ports Auto
Negotiate to the connected device’s speed and duplex mode: 10
Mbps, 100 Mbps or 1000 Mbps, and HDX or FDX (including Flow
Control). Additionally, both models support jumbo frames up to
10240 bytes.
Application Example
Utilizing Power over Ethernet Plus
technology, the PoE+ Giga-McBasic
functions as the power source (PSE).
Both copper ports are capable of sending
data and 25.5 Watts of apower to the
remote Wireless Access Point and the
PTZ security camera.
* SFPs sold separately