User Manual

86
Figure 84 - Measure pulse width
When the X2 - X1 mode is selected, the two cursors could be moved together to the previous or
following pulse to compare their widths against that of the middle pulse.
7.2 Track
Track restricts the cursors to move along the source signal. This allows for quick cursor placement.
X1 and X2 can have difference sources.
1. Use the X1 Source softkey to choose which waveform X1 will track. CH1, CH2, MATH, REF A,
or REF B
2. Use the X2 Source softkey to choose which waveform X2 will track. CH1, CH2, MATH, REF A,
or REF B
3. The second positioned softkey is used to select which cursor to set with the Universal Knob.
Select between X1, X2, and X2-X1. X2 has bigger vertical dashes than X1. Move the cursor
along the horizontal axis and the vertical axis is automatically updated.
4. The cursor measurements are automatically updates on the right of the screen.