User Manual

90
FFF
The time between the first falling edge of source 1 and the first falling edge
of source 2 at the 50% voltage level
LRR
The time between the last rising edge of source 1 and the last rising edge
of source 2 at the 50% voltage level
LRF
The time between the last rising edge of source 1 and the last falling edge
of source 2 at the 50% voltage level
LFR
The time between the last falling edge of source 1 and the last rising edge
of source 2 at the 50% voltage level
LFF
The time between the last falling edge of source 1 and the last falling edge
of source 2 at the 50% voltage level
Skew Time of source 1 edge minus time of nearest source 2 edge
8.2 Statistics
Press the Statistics softkey to show the statistics table for the parameters selected for display. A
measurement parameter must be selected for the statistics table to appear. Press the Clear
button to clear the statistics.
Figure 86 - Selected measurements and the table of statistics
8.3 Gate
The Gate softkey allows you to define a time window in which the measurements and statistics
are collected rather than using the whole waveform. Once in the Gate menu, press the Gate
softkey to turn the gate mode on. Two vertical white dotted cursors will appear. Their position