User Manual

91
on the waveform can be adjusted by pressing the CursorA, CursorB, and CursorA-B softkeys and
turning the Universal Knob.
8.4 To Clear Measurement Parameters
Press the Clear softkey to clear all the measurement parameters and statistics that are displayed
on the screen.
8.5 All Measure
The All Measure softkey displays 30 parameters in a display box for the channel indicated in the
upper left-hand corner. To make this measurement, follow these steps:
1. Press the Measure button to enter the MEASURE menu.
2. Press the All Measure softkey to select On.
Figure 87 - All Measurement parameters
9 Display Settings
This chapter shows how to adjust the display type, color, persistence, grid type, waveform
intensity, grid brightness and transparency.
Display Type
Press the Display/Persist button on the front panel, and then press the Type softkey to select
Vectors or Dots display type.