User Manual

99
2. Press the Save softkey.
3. Press the Type softkey to select the type of data you want to save.
4. Press the Save To softkey and select External.
5. Press the Press To Save softkey and use the Universal Knob to select the desired location.
a) Press the Universal Knob to enter a subfolder when one is selected. Select UP to go
back to the parent directory (UP is only seen when you're in a subfolder).
6. Press the New softkey to create a new file or directory name.
7. Press the Press To Save softkey to save to the indicated file name. A success/failure
message will be displayed when finished.
Figure 92 - Saving a file to a USB flash drive
Recall an external file
1. Press the Save/Recall button to enter the SAVE/RECALL menu.
2. Press the Recall softkey.
3. Press the Type softkey to select setups or reference waveform.
4. Press the Recall From softkey until it displays External.
5. Navigate to the file with the Universal Knob.
6. Press the Press To Recall softkey. A success/failure message will be displayed when the
operation is finished.
7. Turn the Universal Knob to select the file to be recalled, press the Load softkey to recall
the waveform or setup.
10.4 File Management
File management is used in save and recall operations after the oscilloscope is connected to an
external USB storage device. Before using an external storage device, make sure it is connected
correctly.