User Manual

112
2. Press the Next Page softkey twice to go to the third page of the UTILITY function menu.
3. Press the Screen Saver softkey and turn the Universal Knob to select the desired screen saver
time. The choices are 1 minutes, 5 minutes, 10 minutes, 30 minutes, and 1 hour. Select Off to
turn off the screen saver.
4. After the screen saver activates, press the any button on the front to exit the screen saver
program.
11.10 Option Management
The oscilloscope provides multiple options to enhance your measurement abilities. Please
contact your sales representative or technical support to order the corresponding options. You
can view the options currently installed on the oscilloscope or activate the options using newly-
purchased option license codes using this menu.
Do the following steps to install the option on the oscilloscope:
1. Press the Utility button to enter the UTILITY menu.
2. Press the Next Page softkey twice to go to the third page of the UTILITY function menu.
3. Press the Options softkey to enter the OPTION function menu.
4. Press the Type softkey and turn the Universal Knob to select the module to be installed. Push
down the knob to select.
5. Press the Install softkey to enter the LABEL menu to input the license string.
6. Press the Press To Install softkey to enter the LABEL menu to input the license string.
Figure 101 – OPTION function menu