User Manual

133
2. Press the Display softkey and choose On to display the decode lines on the display.
3. Press the List softkey to enter the LIST menu.
4. Press the Display softkey and choose Off, Decode 1, or Decode 2.
5. Press the Scroll and Lines softkeys to set the position of the cursor.
6. Press the Lines softkey and turn the Universal Knob to determine the number of lines in the
list. The range of Lines is 1 to 7.
7. Press the Format softkey and the following choices will be available:
• Binary
• Decimal
• Hex
• ASCII
Fi
8. Press the key to return to the DECODE menu.
Interpreting LIN Decode
 Angled waveforms show an active bus (inside a packet/frame).
 Mid-level blue lines show an idle bus.
 The hexadecimal ID and parity bits (if enabled) appear in yellow. If a parity error is detected,
the hexadecimal ID and parity bits (if enabled) appear in red.
 Decoded hexadecimal data values appear in white.
Figure 124 - LIN DECODE example