User Manual

139
Figure 132 - DIGITALBUS menu
3. Press the Bus Select softkey to select Bus 1 or Bus 2. Selecting Bus 1, for example, will show
the B1 bus display in blue at the bottom of the screen just above the softkeys.
4. Press the System Display softkey to choose Hex, Binary, or Decimal to display the number
represented by the channel inside the B1 or B2 display.
5. A digital status indicator is displayed immediately above the right-most softkeys. A blue box
means the channel is included in the bus. Dark gray means it is excluded from the bus. The
channel with the red box is shown in red on the screen.
The Sampling rate of the digital channels is displayed at the right of the display under the analog
channel information.