User Manual

141
Waveform
Parameters
Sine
Frequency, Amplitude, Offset
Square
Frequency, Amplitude, Offset, Duty (duty cycle)
Ramp
Frequency, Amplitude, Offset, Symmetry
Pulse
Frequency, Amplitude, Offset, Width
DC
Offset
Noise
Stdev (standard deviation), Mean
Cardiac
Frequency, Amplitude, Offset
Gaus Pulse
Frequency, Amplitude, Offset
Exp Rise
Frequency, Amplitude, Offset
Exp Fall
Frequency, Amplitude, Offset
Arb
Frequency, Amplitude, Offset
Table 11 - Waveform parameters
The Amplitude and Offset softkeys have two other selections: High-Level and High-Level Fine for
the amplitude softkey and Low-Level and Low-Level Fine for the offset softkey. When any of
these are chosen, the labels on the softkeys change to High-Level and Low-Level. When the
softkeys are pressed and the Universal Knob is turned, the peak (High) value and minimum (Low)
value of the waveform are adjusted.
The generator's electrical characteristics are:
Amplitude (all waveforms): 4 mV to 6 V peak-to-peak
DC offset (all waveforms): ±3.0 V
Minimum frequency (all waveforms): 1 µHz
The maximum frequency depends on the waveform:
Waveform
Maximum
frequency, MHz
Sine
25
Square
10
Ramp
0.3
Pulse
10
Cardiac
5
Gaus Pulse
5
Exp Rise
5
Exp Fall
5
Table 12 - Waveform maximum frequency