User Manual

18
Press the button to reset the oscilloscope to its default setup state. This is a useful
starting point to let you manually adjust the oscilloscope for your measurement
needs.
This button has two effects. When measurement statistics are being displayed,
pressing this button will set the statistics to zero and start accumulating data over
again. When screen persistence is turned on, pressing this button will clear the
persisted waveforms.
Turn history mode on and off. The history feature allows you to save a series of
waveform traces, then review them one-at-a-time or display them sequentially
at a specified rate. The Sequence softkey in the Acquire menu lets you set up how
many waveform traces (frames) you want to record. Up to 60,000 frames can be
recorded.
Press the Digital button to open the digital menu for the optional MSO 16-
channel logic analyzer. The MSO features are permanently enabled on all –MSO
models.
3.2 Connectors
Analog and External Trigger Connectors
Figure 15 - Analog and external trigger connectors
• Analog Input Connectors (CH1 and CH2): connect your probes and analog signals to these
BNC connectors.
• Front panel external trigger input
Digital Connector
Figure 16 Digital connectors
• Digital Input Connectors (DO-D15): connect the logic analyzer digital breakout cable to
this connector (cable (LP2540C) provided and digital functions (LA2540C) enabled with
the MSO option).