User Manual

27
3.5 Run Control
Figure 22 - Run control buttons
Use this button to set the state of the instrument to RUN or STOP. In the RUN
state, the button glows yellow; in STOP state, the button glows red.
The Auto Setup button automatically adjusts the oscilloscope's settings to get
a stable display.
3.6 Universal Knob
Figure 23 - Universal knob
Adjust the waveform intensity
In non-menu-operation mode, (the menu is hidden or no softkey is actuated by a recent
press), turn this knob to adjust waveform intensity (0% to 100%). Turn clockwise to increase
the brightness and counterclockwise to reduce. You can also press Display/Persist →
Intensity and use the Universal Knob to do adjusting. Adjusting grid brightness (0% to 100%)
and transparency (20% to 80%) are done in a similar fashion.
Universal Knob
When a menu's softkey has been pressed, this knob can be used to select the desired
setting. Press the knob to select the highlighted item. The knob is also used to modify
parameters and to input a file name.