User Manual

54
 > (Greater than specified time): Trigger when the measured pulse width is greater than
the specified time.
For example, for a positive pulse, if you set the pulse width >100 ns, the oscilloscope will trigger
on the following waveform
 [--,--] (Within a range of specified times): Trigger when the pulse width is between the
lower and upper specified times.
For example, for a positive pulse, if you set the pulse width) between 100 ns and 300 ns, the
oscilloscope will trigger on the following waveform
 --][-- (Outside a range of specified times): Trigger when the pulse width is greater than
the upper limit or lower than the lower limit. This is the logical complement of the
previous triggering interval.
Figure 53 - Pulse trigger