User Manual

60
Figure 57 - Relative window trigger
Interval Trigger
This trigger should be used when the time difference between neighboring rising or falling edges
meets the one of the time limit conditions (<, >, [--,--], --][--).
Figure 58 - Interval trigger
Setting Interval Trigger:
1. Press the Setup button to enter the TRIGGER menu.
2. Press the Type softkey. Use the Universal Knob to select Interval and push the knob to
confirm.
3. Press the Source softkey and turn the Universal Knob to select one of the analog channels as
the trigger source.
4. Press the Slope softkey to select rising or falling edge.
Press the LimitRange softkey. Turn the Universal Knob to select desired condition:
 < (less than a time value): trigger when the positive or negative pulse time of the input
signal is less than the specified time value.
Trigger
Trigger