User Manual

62
Setting Edge DropOut Trigger
1. Press the Setup button to enter the TRIGGER menu.
2. Press the Type softkey. Use the Universal Knob to select Dropout and push the knob to
confirm.
3. Press the Source softkey. Turn the Universal Knob to select one of the analog channels as the
trigger source. The current trigger source is displayed at the upper right corner of the screen.
4. Press the Slope softkey to select the rising or falling edge.
5. Press the OverTime Type softkey to select Edge.
6. Press the Time softkey. Turn the Universal Knob to select the desired value.
Figure 61 - Edge DropOut trigger
Figure 60 - Edge dropout trigger
Trigger
Trigger