User Manual

65
3. Press the Source softkey. Turn the Universal Knob to select an analog channel as the trigger
source.
4. Press the Polarity softkey to select a positive or negative pulse to trigger on.
5. Press the LimitRange softkey. Turn the Universal Knob to select the desired condition (<, >,
[--,--] or --][--).
To adjust the time setting, press the softkey immediately to the right of the Limit Range softkey.
Enter a time by turning the Universal Knob to select the desired value.
Figure 65 - Time setting runt trigger
6. Press the Next Page softkey to enter the second page of the TRIGGER menu. Press the Lower
Upper softkey to select Lower or Upper trigger level. Turn the Universal Knob to set the
position.