4471 091608
ii QUICK START GUIDE USER MANUAL - REFERENCE 70 © 2008 B & K Components Ltd. All rights reserved. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without prior written consent from B & K Components, Ltd. B & K Components Ltd. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior notice.
1 TABLE OF CONTENTS ACCESSORIES AND LIMITED WARRANTY TABLE OF CONTENTS FRONT AND BACK PANEL CONNECTION OVERVIEW VIDEO INPUT CONNECTIONS Video Input Connection - HDMI Video Input Connection - Component Video Video Input Connection - S-Video Video Input Connection - Composite AUDIO INPUT CONNECTIONS Audio Input Connection - HDMI Audio Input Connection - Optical Audio Input Connection - Coax Digital Audio Input Connection - Stereo Analog Audio Input Connection - Multichannel Analog AUDIO/VIDEO OUTPUT Audio Ou
2 FRONT AND BACK PANEL 2 1 3 7 24 23 22 8 4 5 6 9 10 21 11 20 12 19 13 14 18 17 15 16 1. the Left Hand Knob - The left and side selector knob is a 5-position rotating knob which serves multiple functions. Pushing in direction of up, down, left or right will scroll through the left hand side options which include Input, Tuning, Station, Audio and Video. Rotating the knob will change the highlighted option when available. 2.
FRONT AND BACK PANEL 6. Headphone Jack - Headphones having a standard 1/4” stereo plug can be connected to the headphone output. 7. Control Output - 1/8” Mono Mini-jack (Tip+ Ring -) source of 12VDC (100mA) Control output for controlling external devices, such as amplifiers and projection screens. A 12V (100 mA) signal is sent or stopped when the IR, RS-232 or Ethernet com mand for CTRL+ or CTRL- is sent.
4 CONNECTION OVERVIEW The following is an overview of connections found on the Reference 70. Further information can be found later in the quick guide or in the Reference 70 manual. This guide should only be used for reference only. It is recommended an authorized B&K installer or dealer is contacted for integration of the preamplifier in advanced installations.
VIDEO INPUT CONNECTIONS Composite Source S-Video Source Component Source HDMI Source Video Input Connection - HDMI The HDMI connection carries both audio and video, although it is possible on the B&K product to only output one or the other (please see the menu structure for further information). To connect an HDMI video source to the B&K, connect the HDMI cable to the HDMI output on the source piece. Then connect the other end of the cable into the corresponding HDMI input on the preamplifier.
6 AUDIO INPUT CONNECTIONS Analog Source Coaxial Digital Source Optical Digital Source HDMI Source Audio Input Connection - HDMI The HDMI connection carries both audio and video, although it is possible on the B&K product to only output one or the other (please see the menu structure for further information). To connect an HDMI audio source to the B&K, connect the HDMI cable to the HDMI output on the source piece.
AUDIO/VIDEO OUTPUT Audio Output Connection - Unbalanced The Reference 70 supplies 7.1 RCA surround outputs. These surround outputs can be used to connect to an external amplifier and/or the subwoofer to the preamplifier. To connect seven amplifier channels, connect seven RCA audio cables between the surround outputs and the amplifier inputs. Be sure to match the appropriate preamp output to the speakers location in the room.
8 CONFIGURATION AND CONTROL There are a few different ways to achieve control and configuration of the Reference 70. Using the component video or HDMI output on the Reference 70 you can get the on-screen menu GUI to an HD monitor. Ethernet or RS-232 communication can also be used using a serial or ethernet control device or a PC. Some restrictions may apply. Please see the full manual or the B&K website for further information.
SAFETY PRECAUTIONS Installation Considerations CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: to prevent fire or shock hazard, do not expose this unit to rain or moisture. Care should be taken to prevent objects or liquid from entering the enclosure. Never handle the power cord with wet hands.
SPECIFICATIONS Specification Reference 70 Preamplifier Surround Outputs 7.1 RCA Type 7.1 Balanced (XLR) Dolby Digital / Dolby Pro Logic IIx / Dolby Digital Surround-EX DTS / DTS-ES Discrete / NEO:6 20 - 20kHz Freescale DSP 56371 (upgradable) 90 mV 92 dB unbalanced / 98 dB balanced 10 kΩ 221 Ω 3V RMS 10 Video / 10 Audio / 40 Tuner 14 (6 HDMI) 2 (1 Pair) 8 Coax / 8 Optical / 1AES-EBU Yes 5.1/ 7.1 (assignable) Yes Yes 120 / 220 / 240 VAC (optional / switchable) Two 10 - 12VDC triggers @ 100mA 17” 19” 6.