User´s manual Radar antenna RADENSO HD+
Main functions of Radenso HD+ Radenso HD+ equipment is the first radar detector from the Radenso family, intended for fixed installation in vehicles. It is designed to protect the driver from fines for speeding; its main functions are detections of micro-wave radars (X / K / Ka narrow bands) and laser guns. In combination with GPS detector Radenso GPS+ (wireless connection), it communicates with drivers in English language and also detects GPS points like red light cameras and sectional speed cameras.
Mounting the antenna: After selecting a suitable location for the antenna and the type of screws, drill two to four screw holes. It is recommended that the antenna is attached with 4 screws. The antenna cable can be slightly bent. Firstly, attach the antenna with two screws crosswise against each other and tighten them partly; then mount the remaining two screws. In some vehicles, it is advisable to carry out the installation using a special support plate that is included in the sales package.
The antenna cable: After fixing the antenna, pull the cable through to the driver’s cab. It is recommended that you add it to the existing cabling and attach by fastening straps. The length of the cable from the antenna to the coupling connector is 1.7 meters. The length of the second part of the cable is 2.5 meters. Antenna connector is waterproof and allows easy connection and disconnection when changing the point of antenna mounting or replacing the antenna.
Operating frequency: Ka narrow: 34,0GHz, 34,3GHz, 34.7GHz, 35,5GHz (± 120MHz) Ka Wide: 33.4 GHz ~ 36.0 GHz K narrow: 24.125GHz (± 70MHz) K wide: 24.125GHz (± 150MHz) X band: 10.525GHz (± 50MHz) Laser: 904nm Technical parameters: Operating temperature: -20 - +85 ° C Operating voltage: 11-16 V Energy consumption: 190 mA normal, 220 mA max.
