Specifications

93
4
The thread ten-
sion is incorrect.
The upper thread is incorrectly
installed.
Correct the upper threading. page 18
The bobbin thread is incorrectly
installed.
Correct the bobbin threading. page 16
The bobbin thread is incorrectly
wound.
Correctly wind the bobbin. page 13
The combination of fabric, thread and
needle is incorrect.
Select a thread and needle that are
appropriate for the type of fabric
being sewn.
page 26
The presser foot holder is incorrectly
installed.
Correctly install the presser foot
holder.
page 31
The thread tension is incorrectly set. Adjust the thread tension. page 45
A bobbin designed specifically for
this machine is not used.
Bobbins from older models, which
have a different thickness, will not
work properly. Only use a bobbin
designed specifically for this
machine.
page 13
The fabric is
puckered.
The upper thread or bobbin thread is
incorrectly installed.
Correctly thread the upper thread and
correctly install the bobbin thread.
page 16,
18
The spool is incorrectly installed. Correctly install the spool. page 13
The combination of fabric, thread and
needle is incorrect.
Select a thread and needle that are
appropriate for the type of fabric
being sewn.
page 26
The needle is bent or blunt. Replace the needle with a new one. page 27
If thin fabrics are being sewn, the
stitch is too long or the fabric is not
being fed correctly.
Sew with stabilizer material under the
fabric.
page 47
The thread tension is incorrectly set. Adjust the thread tension. page 45
Stitches are
skipped.
The upper thread is incorrectly
installed.
Correct the upper threading. page 18
The combination of fabric, thread and
needle is incorrect.
Select a thread and needle that are
appropriate for the type of fabric
being sewn.
page 26
The needle is bent or blunt. Replace the needle with a new one. page 27
The needle is incorrectly installed. Correctly install the needle. page 27
Dust has accumulated under the
needle plate or in the bobbin case.
Remove the needle plate cover and
clean the bobbin case.
page 89
A high-pitched
sound is pro-
duced while sew-
ing.
A rattling noise is
produced.
Dust has accumulated in the feed
dogs or in the bobbin case.
Clean the bobbin case. page 89
The upper thread is incorrectly
installed.
Correct the upper threading. page 18
The bobbin case is scratched.
Replace the bobbin case.
Contact your retailer or the nearest
authorized service center.
–
A bobbin designed specifically for
this machine is not used.
Bobbins from older models, which
have a different thickness, will not
work properly. Only use a bobbin
designed specifically for this
machine.
page 13
Symptom Probable Cause Remedy Reference