Instruction manual

-14-
A
3
5
4
6
7
1
2
3
4
NEEDLE THREADER
1.Lower the presser foot.
2.Set needle in up position.
3.Lower the threader slowly and draw
thread through thread guide (A) and
pull toward the right.
4.Lower the lever as far as it will go
The threader will turn and the hook
pin will go through the needle eye.
5.Position thread below the needle eye
and under the hook pin.
6.Hold thread loosely and slowly return
lever to original position.
Hook will turn and pass
thread through
needle eye while making a loop of
thread.
7.Raise presser foot and pull thread out
about 10 inches from needle eye.
Note: The needle threader can only be
used for
needle sizes 11,14, and
16.
CAUTION: To prevent accidents.
Do not lower the threader lever while machine is operating.
DRAWING UP THE BOBBIN THREAD
1.Raise the presser foot.
2.Hold the upper thread loosely and
press
needle up/down button.
The handwheel will turn one complete
turn.
3.Pull upper thread lightly. Bobbin thread
will come up in a loop.
4.Pull both upper and bobbin threads about
10 inches toward the back and under the
presser foot.
2
1