Instruction manual

-15-

STARTING TO SEW

The machine will be set at 01 automatically to sew straight stitches when power switch is turned on.

CAUTION:To prevent accidents.

While sewing, special care is required

around the needle.

The machine will automatically feed the

Simply guide the fabric to sew straight.

1. Check the presser foot (All Purpose Presser Foot

is on new machine.) Refer to page 6 for changing

the presser foot.

2. Place the fabric under the presser foot.

3. Lower the presser foot.

4. Hold both threads to the back when starting to sew.

Let threads go after sewing a few stitches.

8. When you have reached the end of a seam, stop

sewing and turn the handwheel toward you to bring

the needle to highest position. Raise the presser

foot and pull the fabric out from under the foot to

the back of the machine.

Cut the threads in the thread cutter on the left side

of the machine.

5.While sewing regulate the speed with slide speed

control lever or foot control.

6.Stop machine when you reach end of seam.

7.Raise the presser foot lever.

fabric, do not pull or push fabric.